When the circling machine is powered on and can operate normally, we need to make certain adjustments to the circling machine to better complete the circling operation for us. The adjustment steps are as follows:

1. Firstly, follow the operation process of the electric control box to feed the wire into the cutting blade area. Adjust the position of the forming wheel and cutter to ensure that the product's arc meets the requirements. Simultaneously adjust the cutting blade so that its axis passes through the center of the product.

2. By adjusting the position of the forming wheel according to the operation, the flatness of the product can be adjusted.

3. If the product's output line occasionally moves inward and outward, it is necessary to adjust the adjustment wheel on the adjustment board and increase the straightening of the wire. Most cases are caused by poor wire quality, and it is only necessary to increase the straightening force of the wire.