1、 Comply with the general safety technical operating procedures for metal cutting machine tools.
2、 The work site should be clean and tidy, and any remaining materials, oil, and water should be promptly removed. Workpieces and materials should not be placed randomly to avoid obstructing operations and blocking channels.
3、 The tools and fixtures used must be in good condition and suitable for use, and placed in the designated location. Tools, workpieces, and other objects are prohibited from being placed on the workbench.
4、 Before starting the sawing machine, a detailed inspection should be conducted to ensure that the equipment is in good condition and normal before formal operation can be carried out.
5、 The cutting tools and workpieces must be clamped correctly and firmly. When loading and unloading workpieces with oil or significant weight on the surface, wooden boards should be placed on the bed surface first, and it is not allowed to use hands to support them to prevent falling and injury.
6、 When using a crane to cooperate with lifting and unloading workpieces, relevant regulations on crane safety operating procedures should be followed. No one is allowed to stand under the suspended object, and human body should not be used to balance the workpiece.
7、 During the cutting process of the cutting equipment, people should stand in a safe position.
8、 The sawing machine equipment is not allowed to be repaired during operation.
9、 When cutting oversized workpieces, there should be signs and railings to prevent injury during the cutting process.
10、 During the operation of the cutting equipment, operators are not allowed to leave their work positions.
11、 If there is a power outage midway, the power should be turned off.
12、 If any abnormal situation is found during work, the vehicle should be stopped immediately and relevant personnel should be asked for inspection.
13、 After completing the work, cut off the power supply. Ensure the cleaning of materials after completion of work.